Our trusted fittings are available in a whole new design!

Robust high-quality barbed fitting with cylindrical thread (G1 / 4 "). The fitting is suitable for PVC, OU, PA, PE and silicone hoses with an inner diameter of 10mm. With integrated 1 / 4" Nitrile (r) O ring seal.

The Perfect Seal fittings stand for, as the name implies, a perfect seal with 3 / 8 "tubing.

Note for watercooling beginners:
The connectors for imperial hoses (7 / 16 ", 3 / 8", ½ ") are provided with measurements in mm in our shop. These can differ by +-1mm, Which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp chosen, a larger fitting should be. With some fittings that tend to be larger, though it is possible that a hose with an inner diameter of 13mm actually does seal without a hose clamp.

Technical specifications:
Material: Silver nickel plated brass
Thread length: 6mm
Compatible with hoses with an inner diameter of 10mm (3 / 8 ")
Fitting inner diameter: 10m
Upper fitting outer ring: 12.4 mm
Middle hose contact surface: 11.6mm
Key width: 16mm

Overview:
10mm (3 / 8 ") hose clamp: up to 8mm none, from 10mm up required
10mm (7 / 16 ") hose clamp: up to 8mm none, from 10mm up required
12mm (1 / 2 ") hose clamp: 11mm up to none, from 12mm up required
13mm (1 / 2 ") hose clamp: 11mm up to none, from 13mm up required

 

Extent of delivery:
Black nickel barbed fitting with O-ring seal

Note for watercooling beginners:
The connectors for hoses (7 / 16 ", 3 / 8", 1 / 2 ") are provided with measurements in mm in our shop. These can differ by +-1mm, Which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp chosen, a larger fitting should be. With some fittings that tend to be larger, though it is possible that a hose with an inner diameter of 13mm actually does seal without a hose clamp.