WatercoolingUK exclusively taking on board UK Distribution rights for TFC - The Feser Company for their Performance Cooling Liquids, X-changer Radiators and Accessories!!
If you are interested in Reselling any of the Feser product range in the UK please fill out our Trade Application Form form and we will get you a hooked up ASAP.
Feser One Cooling Fluids
The Feser Company GmbH releases new Non Conductive coolants for water cooling systems, brand name Feser One or F1 for short. The liquids mark themselves not only by the new variety of UV reactive colours but also through the new corrosion protection, which better protects metals like Copper, Aluminium, Brass and Nickel. The colour variety makes it possible for each PC Modder to take influence on individualizing the system.
The ready to use liquids are filled up in 1 litre bottles and can be filled directly into the cooling system reservoir or fill port. Mixing your own coolant belongs in the past! this is an all in one solution with 4 Anti Corrosive additives, Non conductive formula and UV Reactive. This is the only coolant to buy.
Details:
• Corrosion protection for Copper, Aluminium, Brass and Nickel
• Prevents Algae growth in your cooling system
• Conductivity less than 10µS/cm (20°C)
• Dropper Cap, No funnel required
• Ready for us, No mixing required
• Availible in 6 UV Reactive colours
• Totally Odourless
• Environmentally Safe
External Reviews:
All of this is wrapped together in a price tag thats well below any of the
other fluids. Like I said, theres really just not much to dislike about Feser
One – which is why it wins the bit-tech Award of Excellence. With such a good
alternative, theres little point to taking the risk with water.
TFC - Xchanger Radiators
After a very long development time, many patterns productions and dozens of test runs, we have now developed a radiator, which is seeking his peers.
We only use the best materials for these radiators.
The fins and water channels consist of high-grade copper (e-Cu).
The water chambers consist of a brass alloy.
We have to ensure that the layer of the black finish remains very thin, thus the heat-air transfer is optimized to a maximum. The G1/4" thread for the inlet and outlet of the radiator offers the highest compatibility for a wide variety of fittings. The radiators can be installed horizontally or vertically. For a vertical mounting the air can escape entirely from the radiator by using the bleeder screw.
The radiators have a distinctive "TFC - Xchanger" Logo.
Each radiator after completion has been checked of impermeability and its function.
Only then it gets the hologram label and comes with a serial number. Each radiator is a single piece. As a result, confusion or plagiarized almost impossible.
Details:
• Compatible with all available Waterooling Systems
• Water Channels and Fins made out of ECu Copper Material
• Sealed in VCI Bag - 5 Years Corrosion Protection
• Mounting Screws for Case (4/8/12)
• Mounting Screws for Fan (4/8/12)
• Serial Number with Holographic Sticker
• Stamped TFC – Xchanger Logo
• Brass Water Chambers
• Black Finish (5µm)
• G1/4" Threads
• Silicon Pads (1/2/3)
• Bleed Valve Screw
• ColorBox Packaging
• Warranty Card
• 3 Years Warranty
|
EXTREME
PERFORMANCE
Our newly developed technology and patented design
brings you double the cooling power to your system. Better materials,
the newest technology and a cool design promise an outstanding
product. |
|
NOISELESS
- SILENT OPERATION
By using greater spaces between the copper fins
the air flow rate is increased and gives you the option to use
fans at a lower speed. The lower the speed, the lower the noise
level. |
|
HIGHFLOW
OPTIMIZED
The radiators are especially designed to run with
HighFlow system configurations. We recommend HighFlow Systems
to maximize your heat dissipation. |
|
MAXIMUM
SYSTEM COMPATIBILITY
The radiator inlet and outlet ports are G1/4”
threaded, helping to give you multiple fitting options. The X-CHANGER
can replace any previous radiator you were using in your system
loop. |
|
PERFECT
HEAT TRANSMISSION
The water channels and fins are made out of pure
copper, which allows for the transfer of heat out of the water
effectively and quickly due to the good heat conductivity of the
material. |
|
INSTALLATION
- EASY USE
Enough srews are provided to install the radiator
properly. You can place the radiator wherever you want. The position
(vertical / horizontal) will not effect the cooling performance.
|
| |
ENERGY
EFFICIENT
Due to the ability of using low speed fans, and
less water resistance for the pump, the operating system saves
energy consumption. |
|
External Reviews:
• Martins Liquid Lab - Pressure Drop Flow Testing
 |
|
